Senior Partner & Managing Director
If any one factor explains why the US has remained the world’s innovation powerhouse since World War II, it is the country’s overwhelming leadership in research and development. This commitment, combined with a passion for taking risks, underpins America’s ability to create more intellectual property than any other economy and has spawned many new industries, including semiconductors, computers, aerospace, and digital telecommunications. Continued US R&D investments—some $7.1 trillion from 1995 to 2015—have enabled the US to remain at the forefront of such fields as advanced materials, energy, and biopharmaceuticals.
Dive deeper into the latest data on R&D spending, however, and continued US leadership in industrial innovation looks far less secure. The US remains dominant at the front end of R&D: the nation invests three times as much as any other economy in basic research, which focuses on the pursuit of scientific knowledge, and applied research, which turns discoveries into technologies useful to industry. (See Exhibit 1.) Breakthroughs in physics and material sciences, for example, have led to the digital technologies that have revolutionized virtually every industry.
But the picture is different when it comes to the back end of the R&D chain— development research, which translates new knowledge from basic and applied research into commercial products and new manufacturing processes. China recently surpassed the US as the biggest spender in that area. In another five years, China will be investing up to twice as much as the US on development research, assuming that both economies maintain their recent pace of spending growth. (See Exhibit 2.)
Concerns that US global leadership in innovation is eroding have led to calls from think tanks and blue-ribbon commissions to dramatically increase government spending on R&D and to promote strategic industries. Many of these proposals have merit, and several US initiatives to support manufacturing that have launched since the 2008–2009 financial crisis show promise. Large new infusions of federal money, however, are difficult to sustain. And bigger R&D budgets alone will not address the core issues facing America’s manufacturing sector, if the way those funds are spent doesn’t change.
There is a lot of friction in the US innovation system that slows the translation of scientific and technology breakthroughs into commercial products and processes. One source of friction occurs between academia and private industry. The lion’s share of basic and applied research is funded by the federal government and conducted at universities, while industry focuses overwhelmingly on development research.
Friction among companies, meanwhile, slows innovation on advanced manufacturing processes. While many companies participate in public-private research consortia devoted to developing new processes, a reluctance to fully collaborate often results in solutions that are too narrow to meet the needs of entire US industries or that are not disseminated widely enough through manufacturing supply chains.
What can the US do to get more economic bang from the immense sums it already invests in R&D? Our analysis indicates that there is significant potential for the US to generate much more product and process innovation from its investments in basic and applied research by streamlining existing “adapters,” such as universities, for linking government-funded academic research to private industry. US research universities can accelerate product innovation by reducing friction and serving as better bridges between academia and industry. Research consortia can also be productive adapters for developing innovative manufacturing processes if companies improve the way they collaborate. Such collaboration is especially critical if US industry is to successfully compete with other nations in deploying advanced Industry 4.0 manufacturing systems, such as autonomous robots, additive manufacturing machines, and digital simulation tools. (See “Why Advanced Manufacturing Will Boost Productivity,” BCG article, January 2015.)
We estimate that accelerating product and process innovation in the US can boost annual manufacturing output by more than 5%, or around $100 billion. (See Exhibit 3.) Even more important, it could create a virtuous circle of ongoing productivity improvement and output growth.
American competitiveness in industrial innovation rests on a powerful base. From 1995 to 2015, the US has invested around $7.1 trillion in total R&D, about 2.5 times as much as China, the next biggest spender. (See Exhibit 4.) Even though the annual R&D investment gap has narrowed dramatically over the past decade, the estimated $500 billion that the US spent in 2015—around 2.8% of GDP—was nearly one-third more than what China spent (on a purchasing power parity basis), three times as much as Japan, and about four-and-a-half times as much as Germany, according to estimates by the Industrial Research Institute (IRI), an organization of corporate and federally funded research organizations. One-third of US R&D spending is dedicated to basic and applied research, a far higher share than in other industrial economies.
Another big advantage for the US is its university system, which directs more than $65 billion in research annually and marshals the expertise of some 450,000 graduate students and research assistants in science and technology fields. The US is home to 75 of the world’s 200 highest-rated universities and to more than 100 universities that conduct research at the highest level. Indeed, the US university system is a valuable resource for the entire world: academics in Japan, South Korea, China, France, and other industrial economies cite US publications far more than the other way around. According to a recent survey of global researchers by IRI, most believe that the quality and productivity of R&D remain far superior in the US than in China and most other major trade partners.
The US has struggled in recent decades, however, to translate technological breakthroughs into domestic manufacturing. Flat-panel displays, lithium ion batteries, digital mobile handsets, notebook computers, and photovoltaic cells and panels are all examples of products created with technologies that were invented in the US but largely industrialized elsewhere. While low production costs in East Asia have been one of the major factors accounting for this phenomenon, another is the fact that governments and companies in other industrial economies have focused far more heavily on developing and disseminating applications to local manufacturers as a matter of national industrial policy. Development accounts for 84% of China’s total R&D spending, for example. Over the past decade, Chinese spending on development rose by a compound annual growth rate of around 20%, compared with 5% in the US. In 2003, the US spent four times as much as China on development research; in 2013, the two nations spent roughly equal amounts.
Of course, China is hardly alone in focusing on development. Other nations that have made advanced manufacturing a high priority—including Germany, Japan, and South Korea—are also moving more aggressively to translate technological advances into new commercial products and next-generation processes. Because scientific and technological knowledge travel quickly around the world—while development tends to remain close to where the goods are produced—the US has essentially been subsidizing innovation in other economies that have made advanced manufacturing a high priority.
Academic research in other economies is also more aligned with the interests of manufacturing industries. In the US, contributions by the private sector account for less than 5% of university R&D budgets. In South Korea, companies contribute 11%. In Germany, that figure is 14%; in Russia, 27%; and in China, 34%. (See Exhibit 5.) What’s more, academic research in the US focuses less on the needs of manufacturing industries than such research in other economies does. Just 11% of US academic research publications relates to engineering. In China, 38% of all published research is about engineering. (While comparable data on academic engineering research is not available for China, it can be assumed that universities account for most of it.)
We identified the key obstacles to converting basic and applied academic research into new products and processes—and more domestic manufacturing—through our interviews with several experts in US industry who have direct experience working with universities and research consortia.
The following sources of friction between academia and industry were cited as some of the strongest impediments to translating university research into innovative products:
The experts we interviewed also observed that several types of friction among companies hindered efforts to translate research into process innovation through R&D consortia:
If companies and research organizations can address these frictions, the US can more efficiently commercialize government-funded research and boost manufacturing growth.
The US already has an infrastructure for translating academic research into new products. For example, most major US research universities—and even national laboratories—have technology licensing offices, entrepreneurship training programs, and small-business incubators. Many also have research parks on or near their campuses where industry executives and academics can work together.
But manufacturers could generate more product innovation from federally funded research if friction between academia and industry were reduced and adapter mechanisms at universities were improved in the following ways:
Academic institutions could reduce friction in collaborative research by adopting a more rigorous, disciplined, and transparent program management process. For years, the private sector has used program management tools to understand and manage massively complex projects with uncertain outcomes. In our experience, such tools have been able to improve the probability of successful outcomes from as little as 25% to more than 80%. A consistent program management process can also increase visibility into the R&D pipeline and help align a company’s commercialization efforts with a project’s timeline. (See Strategic Initiative Management: The PMO Imperative, BCG report, November 2013.)
The US has decades of experience with public-private research consortia in which universities, industrial companies, and government laboratories develop and disseminate new manufacturing processes. For example, SEMATECH, a semiconductor manufacturing consortium established in 1987 and funded in part by the US Department of Defense, has provided crucial support to the development of next-generation lithography technologies, materials, and wafer designs that facilitated America’s resurgence in semiconductors. And, since 2014, the National Institute of Standards and Technology (NIST) has launched 14 R&D consortia with universities around the country. These consortia focus on innovation in such fields as digital manufacturing and design, additive manufacturing, photonics, and renewable energy systems.
The record of US consortia has been mixed, however. We believe that significant gains can be achieved if consortia focus on developing processes that have wider applications across entire industries. This will be especially critical in the era of Industry 4.0. While the US is at the technological forefront of Industry 4.0, some nations, including Germany and China, are moving more aggressively to adopt them. (See Time to Accelerate in the Race Toward Industry 4.0, BCG Focus, May 2016.)
Consortia can be more effective by having members work alongside one another at dedicated facilities, by bringing in suppliers as members, and by helping to provide training for people who want to join the skilled, advanced manufacturing workforce.
We believe that the actions we have outlined above require only modest additional investments by industry, university, and government. That is because we essentially are calling for improving the “software” of the existing US industrial innovation system, rather than adding expensive new “hardware” in the form of new programs and bureaucracies.
The required investments are especially modest when compared with the potential impact. We believe that, in addition to boosting annual manufacturing output, increased industrial innovation can create a virtuous circle that will reinforce ongoing productivity improvement, output growth, and further R&D investment. Improved global cost-competitiveness and the arrival of advanced Industry 4.0 manufacturing technologies have presented the US industry with one of its best opportunities in decades to reset the game. Now the US needs to seize the opportunity by taking the actions needed to get the most value from its immense research assets.
This report would not have been possible without the efforts of Ben Brabston, Cassandra Grafstrom, and Doug Kochelek. We thank Pete Engardio for his help in writing this report, as well as Katherine Andrews, Gary Callahan, Lilith Fondulas, Kim Friedman, Abby Garland, and Sara Strassenreiter for their contributions to its editing, design, and production.